Description
Our 4-LED unit has four high brightness, high-quality LEDs attached to a single join with two lead wires ready to connect to your power source.
For the 5mm, 3mm, and 1.8mm LEDs there is an 8-inch wire to each LED from the circuit, giving you ample space to separate your LEDs to light more space with fewer wires to connect.
For the Mega, Chip, Nano, and Pico size LEDs there is a 3-inch wire to each LED from the circuit, since these are meant for use in smaller scale trains or models, and lots of excess wire can be a hassle.
Choose from three different voltages: 3 volt, 5-12 volt, or 7-19 volt AC/DC/DCC. Every unit is pre-wired to the proper resistors. The AC/DC/DCC option also has the proper bridge rectifiers, so they are ready to hook up to your train transformer or other 7-19 volt power source.
You have a choice of either cool or warm white. Our wide selection of battery holders means you can have more flexibility with your layout.
This is a great bright way to add nice bright light to your model trains, passenger stations and buildings, or your own ideas!
These micro LED lights are ideal for projects that require a lot of illumination but very little space for installing lighting. Popular among our modelers, miniaturist and dollhouse customers, the flexible and thin magnet wire allows customized placement for each LED with up to a maximum of 16 inches between LEDs.
"What do I need to run these?"
| 3 volt use |
|---|
|
3 Volt coin holder with switch |
| 5-12 volt battery / regulated adapter |
|---|
|
Your own battery |
| Your own AC/DC or DCC supply: 7-19V |
|---|
|
7-19 volt Universal AC/DC/DCC lights are already set up "plug-and-play" for your own power supply |
All of our LEDs come with a 2 year warranty!
This unit was originally suggested by our friend Stephen Priest, Master Model Railroader. He uses it for HO scale locomotive and passenger car lighting.
You may also like
Recently viewed