USB Type A Power Supply Cable: Power for your LEDs

Use a USB Cable to Power your LEDs.

This is a convenient way to power your LEDs.

• Choose from 3 Volt or 5 Volt USB adapters.
• Simply plug into any:
• USB Power Hub
• USB Portable Charger
• USB Power Bank

• Runs up to 25 of our 3 Volt LEDs.
• USB uses 5 Volts, so our 3 Volt USB adapter uses a small voltage regulator to bring the voltage down to 3 Volts.

• Runs up to 75 of our 5-12 Volt LEDs, depending on the Amps of the power source you are using.
• A modern smart phone fast charger, either wall plug, or portable power bank, will be able to run 75 LEDs. Slower chargers will run less, with a rule of thumb of 50 LEDs per 1 Amp of power.

This USB connector has a red wire and a black wire. All of our LEDs have a red wire and either a black or green wire. To connect, twist the red to red, and black to black/green.

"How long will the LEDs run between charges?"

It depends on the capacity of your power supply.  A portable charger that charges your cell phone would power 10 LEDs for 150-400 hours.