AA Holder with Switch
Made to run our 3 Volt LEDs
This fully-assembled unit features- a AA holder made to hold 2 of AA batteries
- Wire leads
- a convenient push-on push-off button switch to turn your LEDs on or off
Related Items you will need
Shrink Tube - Shrink Tube provides a nice solution for protecting the exposed wire connections. The AA holder with switch does not come with Shrink Tube, but you can get some on this product page: Shrink Tube
This is another way to run your 3 volt LEDs. This 3 volt output AA holder can run any of the LEDs you would run on a coin cell. And it can run more of them.
In our tests, the AA holder is 2700mA and can easily run 1-135 LEDs safely and brightly,
10 LEDs will run close to 60 hours before the LEDs start to get dim and you need a new battery pair.
Get our AA holder with a connector added. This is convenient when you want to replace the batteries, or if you just want to remove the batteries when you move the project around.
The AA holder has the "female" socket and you get a "male" plug with 8" red and black kynar with this unit. Connect your LEDs to the wired male connector, then plug the LEDs into your battery.
