As well as the telephone boxes, I found another use for the warm white chips in newspaper kiosks for platforms and stations
Shelves with models
Finally got to the lighting project. Was able to install �headlights� in two 1/29 model pickup trucks. They were built by different manufacturers so one was a relative cakewalk while the other was not so easy. Got both done OK though. And I got the welding lights installed as well. It�s impressive.
Polar Express observation car
LED marker lights on Polar Express observation car.
Polar Express
LED marker lights on Polar Express observation car.
Switcher moving the crane
Here's a short video of the switcher moving the crane. It's moving faster than I would normally do only to make the file size smaller.
Roger
An amazing model of active town
"Here is a video we posted on YouTube
featuring the fire trucks with your
fast rate 1.8 LEDS."
Steven Palmer
Very old tow truck
Vintage tow truck connected to the battery
Blacksmith by the railroad
My blacksmith shop with a Fire LED kit for the forge and a warm white LED to light the interior.
SW900 Buffalo Creek
SW900
Bill Klopp
Little Critter train
"...All of them I wired to track pickups so they are on all the time." - Little Critter
Bill Klopp
SOO MP15 train
"My MP15, look really nice on my HO layout!"
Bill Klopp
Roundhouse Lighting
Kevin Brady shared photos and a full article about his roundhouse in his train layout. This roundhouse was lit using Evan Designs' warm white nano LEDs.
Interesting Railroad Model
Dave Bechtel shared this photo of his two Dept. 56 pieces that now use Evan Designs LEDs. The headlights of the engine and cars have LEDs installed. "The pictures don't really show the full effect ... A few years ago I did a similar display using 3v, 6v and 12v lights along with several AC adapters. Needless to say, it was a nightmare. Your LEDs resolved those problems, resulting in a well-lit and easily managed display."
ATSF Train wagon
"I finished this last week... just didn't get around to take a vid of it (enclosed). WW interior lights to go with the original incandescent, 2 green markers and a red EOT. COOL Your blue bulbs just arrived. Going to be a cool project. Painted them just now, but have to wait for some decals to arrive before it's finished.
Thanks again,
Roger"
The crowd next to the railroad
Two fire vehicles with red flashers Tom Sturm
Tow truck model
Tow truck with yellow flasher Tom Sturm
Police in action
Police with head lights and light bar. (tail lights and siren were also installed) Tom Sturm
Brave firefighter
House on fire Tom Sturm
Vintage Taxi
Taxi with flashers Tom Sturm
Scool bus on a train layout
Tom's 2009 train layout
AEC
Mysterious crate
Fire on a train station
Model ofthe train station with led fire
Bunch of Workes are weldig
A vibrant model of workers on the line
Railway workers at night
"I am with a group of HO railway modellers and we find it extremely useful to be able to hook up leds etc. directly to DCC track power. We are a modular group www.hotrak.ca and I and several others do not have a home layout so we must be able to use DCC track power. Once again, many thanks. I am sure we will be taking advantage of Evans designs in the near future."
The train passes a sleepy city
I purchased a 10-pack of your 3mm universal LEDs for my passenger train about three weeks ago. As soon as they came in, I ran down to the train club and had them installed in about 1 1/2 hours. I put two LEDs per car, minus the ACF 70'. This is picture of my passenger train, which is in front of a special scene called Germantown (it was donated to our club, which is CB&W, or Chesapeake Bay Railroaders). Everyone in the club loves the look, and I often like to turn off the layout lights to do some night running (although we need more building and street lights to make this look good). I hope you enjoy them."
Adam Kemp
A train on the edge of the city
"This project started out as just purchasing an Athearn Genesis Challenger #3985 (I always wanted one; never got the old Bowser kit assembled). Once I purchased that, I had a craving to build a passenger setup, which consists of six Walthers heavyweight passenger cars: ACF 70', Pullman 8-1-2, UP Gray 8-1-2, UP Gray 10-1-2, UP Gray 6-3, and UP Gray Solarium Observation Lounge." Adam Kemp
Duble garage
Welding LEDs show up great in this scale model garage.
Windturbine
"I have attached two images of how we use your LED in our control cabs and a photo of our turntable." Thank you to Millhouse Turntables for these great pictures! That is one fantastic turntable!
Pennsylvania steam train
"I wanted to show you how my last project came out. I modified a PW Lionel 2671W tender to match my 681 turbine. I made custom handrails from 726 boiler rails and then added my [Evan Designs] LED backup lights." Roger Fluhr
Blazing speed
"I wanted to show you how my last project came out. I modified a PW Lionel 2671W tender to match my 681 turbine. I made custom handrails from 726 boiler rails and then added my [Evan Designs] LED backup lights." Roger Fluhr
A dazzling light locomotive
736 post war Berkshire with our 3mm warm white installed "The headlight mod I did on my 736 Postwar Berkshire. You'll see how awesome the beam is now." Roger
Train turntable
"I have attached two images of how we use your LED in our control cabs and a photo of our turntable." Thank you to Millhouse Turntables for these great pictures! That is one fantastic turntable!
UK Telephone Box
Telephone Box with our warm white Chip giving it a nice glow. Thanks to Layouts4U for this great picture. Find out more about this phone booth from Layouts4U!
Upcoming train
Bud used 2 of our 3mm cool whites in this great picture from his 3-rail layout. Notice the lights shine onto the rails ahead of the train.
Back of the train
This HO scale train looks great with our End of Train Flasher installed in it! End of Train FRED.
""It's just a simple 6x3x2 Project box with 4 momentary (on-off-on) switches hooked up to a Lionel O gage setup to replace the older big style remote momentary's to control the switching of the remote track switches. These are the 1st 4 switches from left to right. Those have the 3 prong red/green LEDs hooked up to them. The remaining 2 switches I have hooked up are for accessory power to control accessory lights for structure lighting, street lights, etc. I have the 2 prong Blue LEDS you sent me hooked up to them. So pretty simple setup, nothing elaborate, but your LEDs are great. I will be recommending your site to all I know that need them. The pictures show when the remote switches are in the Green position they are for the straight and red for switching to a different track. The Blue just means the power is on."" Chris"
Williams Locomotives side by side
A couple of beautiful Williams Locomotives with our Universal LEDs. installed.
Train wagon on a box
I added Evans designs Fleshing LEDs to Make my EOT's Operate on my MHC's!
Lionel Polar Express observation car
Here is a picture of my scale Lionel Polar Express observation car. I put one of your FIRE LED kits in the roof and mounted a campfire and "hobo" figure. Now I am ordering more LEDs for the rest of the customizing of this car. A 3mm Universal Fire Kit was used for this great effect!
Welding a railroad bars
Welding Scene! This scene really looks terrific at night. Thanks to Collin Churcher for this great photo from his HO scale layout.
Small red locomotive
Lionel Lines locomotive model
CSX Electic engine
O scale CSX shell using 3mm warm white for ditch lights, a pair of 3mm warm whites for the headlight. A 5mm warm white illuminates the engineer, while a 3mm flashing yellow flashes in the top.
Union Pacific Caboose 3862
Caboose train with the lights on
Bridge with the passing train
Great use of red and green LEDs in this bridge while a train passes overhead.
The train arrives from a distance
This steam engine is a Williams Crown Edition made in 1985... It is the K4s version... All brass... I did not like the way the headlight illuminated, so, I replaced it with one of your LED's... ...had to do a little improvising though... Walla... it is really bright and the wife likes the way it illuminates the wall in our train room while running on our layout. It sure does dress up the engine.
F3 ABBA Diesel Engine
"A fellow stopped in and had a custom painted B&LE F3 A-B-B-A set and wanted "your" LED's installed. Guess he saw them at a show some place and liked what he saw and then another fellow told him about me... So... He wanted the bright white for headlight for the power unit, and he wanted green side marker LED'S... For the Dummy "A" unit he wanted bright white for the headlight and red side marker LED's. He also had a Bay Window caboose and wanted red LED's for side markers and a red flashing LED for the rear. Of course we did take care of him and the photos are not that great, but, shows the F3A units with light on and in dark... He loved them and is bringing back other engines and cabooses." J. Drane, J&J Trains
Premier GP30 Diesel Engine
"I sent you these pictures of my MTH GP30 that I converted to your LED's and added ditch lights. I also modified it with Atlas GP35 pilots." Stan Richardson Stan used our Universal LEDs for this great modification!
