Description
Fully Assembled LEDs Ready to Use Nothing to add
Yes! You can Connect these LEDs to any track power source. These solid non-flashing LEDs will work great with 7-19 Volts of AC or DC power input.
Guaranteed to stay lit for 2 years with free replacement. Thousands and thousands of these LEDs are now in use, on all types of track and transformer power supplies.
Our LED Lights can be used for Locomotive Headlights, Passenger Car Lights, Ditch Lights, Yard Lights, Building Lights, and much more. Low heat super bright LEDs only draw a tiny amount of power: 20 milliamps.
Choose your colors, we have warm white, cool white, red, orange, yellow, green, blue, ice blue, pink, and purple.
Deciding which white to get?- Our Warm White LED closely matches the warm glow of incandescent lighting. Use warm white for most locomotives. Customers tell us our Warm White is a good match to the original Lionel Headlight.
- The Cool White LED has cool cast, much like fluorescent lighting. Consider cool white LEDs for newer diesel locomotive headlights
We have these LEDs in several voltages, so you can get the right voltage for your project!
3 Volt Solid LEDs 
|
5-12 Volt Solid LEDs 
|
Much more than just a resistor, we have already added the Bridge rectifier, the correct capacitor, and the resistor. You just connect to your track power!
You will notice both leads on these LEDs are black. That is because the polarity does not matter. The bridge rectifier takes care of this. Connect these to power "either way" you are covered.
These LEDs are not meant for connecting directly to decoder boards which have low voltage positions. They are fine to use on Decoder positions of 12 volts and up!
The rectifier is 3 inches from the LED and there is either 8-inch or 14-inch input wire.
Want more information? Check out our LED FAQs and customer photos of LEDs in action in our gallery, or our LED installation Tips.
Don't forget these other accessories to help wire up your LEDs!
Switch to LEDs today!
LEDs for Model Railroads, a Video!
Customer Photo: Williams by Bachman Sharks running at 11 volts, before and after the 3mm LED upgrade.
Customer Reviews
Based on 98 reviews
98%
(96)
2%
(2)
0%
(0)
0%
(0)
0%
(0)
J
Great products, great service, about says it all!
M
I heard about Evan from a train club member. The lights were better than I expected, quality. Customer service was excellent and helpful.
B
Great product! Fairly priced, quick shipping and great quality! I’ve bought several different LEDs from this site and was satisfied every time!
D
Always perfect updates my LL old loco. Looks cool .
j
Some older Modern-Era Amtrak; NY Central; Pennsylvania; and a host of others are nearing end-of -life bulbs for passenger cars. Enter Evan-Design, a cheaper; better; and easier replacement.
R
3mm fit perfect in the front and back of the trolley car. A bit expensive, but oh well. I am satisfied..............
J
These lites work great and are easy to install. The built in module keeps you from wiring them backwards and blowing out the LED. Most of my slot cars have these in them and have been running for years. No loss of power to the motor is noticeable.
W
easy to install on big diesel. the young lady got everything that I needed.
N
installed these on a Steam loco with a bad front light. It worked flawless and is nice and bright. I like the thin single strand wire, it makes it easy to solder and bend into place.
W
Needed new lights for HO trains. The led option from Evans worked out well.
You may also like
Recently viewed
Back to Mini LED Lights for Hobbies & Models