micro LEDs
micro LEDs colors
Chip Nano Pico and Z LEDs sizes
Chip Nano Pico and Z LEDs in full light
Different colors micro LEDs on one coin cell battery
micro LEDs chip
micro LEDs nano
micro LEDs pico
the smallest micro LEDs z

Chip, Nano and Pico LED Lights

 
Size
Color Green
Voltage
Wire Length
Price
Regular price $3.00
Regular price Sale price $3.00
/
  • 313 items in stock, ready to ship
  • Backordered, shipping soon

Description

These super small LEDs are known as surface mount LEDs, SMD LEDs, or Chip LEDs.

They are very small and compact yet still very, very bright! The benefit of a flat and compact LED Chip, already wired for you, is that it still gives a great amount of light, but can be mounted flush, with no bulb shape showing.

We have taken these SMD Chip LEDs and taking care with tolerances, added 8 inches of red and green superfine magnet wire.

Get these chips already wired, tested, guaranteed, and fully ready to connect to your power supply. No resistors need to be added, we have done that part!

Need a really, really small LED? Try our new Z-LED
At 0.65mm wide by 0.40mm height by 0.36mm thick these are our smallest LEDs.  When it is not lit it is hard to see, so if your project needs a LED that will not be visible until turned-on this is a great choice.

Frequently Asked Questions

"What do I need to run these?"


"How many can I run at once?"

  • Using a 3 volt coin cell holder you can run 1-10 chips.
  • Using a 3 volt AAA holder you can run 1-30 chips
  • Using a 9 volt battery snap/switch you can run 1-50 of the chips.
  • Using a 12 volt 1 Amp supply is also 50 chips, no need to turn off.
  • Using your own power? The chips draw 20 milliamps each. So check your power supply to see how many milliamps it lists. A 1000 milliamp supply can run 50 chips.

"Can the chip LEDs be run along with other LEDs from the same battery or coin cell?"

Yes the chips can be run right alongside all of the other sizes of LEDs on the same power supply.

"On the AC chips, what size is the rectifier/resistor unit?"

evan designs universal rectifier
This diagram shows the size of the rectifier unit

"I need the AC type chips but I have to run them through a tight passage?"

We have a solution! See our separated LEDs here: Separated



This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 331 reviews
96%
(319)
2%
(8)
1%
(2)
0%
(1)
0%
(1)
A
Anthony Quindazzi
Excellent products and service

Great products and service. Had everything I needed to complete my project.

B
Bryan S
Z size leds

Z size leds are super easy to add to gunpla with minimal modifications. Super happy with the results on my kotobukiya anubis kit. I put in several orders in a row and Evans designs combined my orders and refunded the extra shipping costs. I am a fan of what you guys do here.

J
Jjmh
Pico

Great product. Great company to deal with. Great C. S.

P
Paxton Gyves

These little lights work very nicely! I ordered the picos and they were sooo tiny! Perfect for smaller crafts.

C
Clifton Smith

Absolutely perfect customer service!! Always quality product and I appreciate the follow up to make sure my order was all compatible with my needs. Love it! Future orders guaranteed because of this great service.

T
Timothy Guldner

Always great

B
Ben Tretter
LED

Ordered pico, nano, and z.Very small and bright.

B
Byron Arnold
Orders

All products have been easy to use in my projects and are a good value

P
Paul Lundwall
Awesome

I wear over sized contact lenses that require a special tool to insert them. I needed a focal point in the tool to help with alignment and insertion. I use the size Z or pico size LEDs imbedded at the bottom of the tool. I have been doing this for months now. My success rate of getting in the first time right went from 40% to 99%.
Thanks

G
Gregory Richmond
Good

Had just what I needed

Recently viewed