Skip to content
Add working Traffic Lights to your Model Town or Model Car Diorama
Evan Designs traffic Light Circuit simulates the Green, Yellow, and Red changing pattern of Traffic Lights. The circuit has a 1-minute rotation that automatically switches the colors from green to yellow to red.
What’s Included
A fully assembled circuit with Green, Yellow and Red LEDs in Nano size for smaller scales and 3mm size for O scale or Slot Cars.
***Traffic light fixtures are not included.***
We have a 2 set option for basic intersections or a 4 set option for 4-way intersections.
2 Set Option for 2 Traffic Lights
- The 2 Set Option contains 6 LEDs: 2 Green, 2 Yellow, and 2 Red. This will be enough for 2 traffic lights in a basic intersection.
- When you turn on power Set A will be Green for 25 seconds and Yellow for 5 Seconds, all while Set B is Red for 30 seconds. After 30 seconds set A turns Red and Set B goes through the same green to yellow to red sequence. At 1 Minute the sequence starts over.
4 Set Option for 4 Traffic Lights
- The 4 Set Option contains 12 LEDs: 4 Green, 4 Yellow, and 4 Red
- The 4 sets provide lights for 4 traffic lights allowing you to simulate a 4-way intersection. The opposing light sets have the same action described for the sets in the 2 Set option described above.
-
Additional Items You May Need
Shrink Tube - Shrink Tube provides a nice solution for protecting the exposed wire connections. The Battery Strap with switch does not come with Shrink Tube, but you can get some on this product page: Shrink Tube
Extra Wire- The Traffic Light LEDs come with 8 Inches of wire input wire. It also has 8 inches out to each LED. Consider purchasing our 25 ft spool of insulated Kynar Wire to bring this out to your power supply
"What do I need to run these?"
| Your own AC/DC or DCC supply: 7-19V |
|---|
|
7-19 volt Universal AC/DC/DCC lights |
| 5-12 volt battery / regulated adapter |
|---|
|
Your own battery, or for 9 volt get our |
Recently viewed