Description:
An easy way to bring power to your 5-12 Volt LEDs and accessories.
The 1 Amp switch is a push-on, push-off switch. We have pre-connected the switch and battery strap, nothing left to do but connect your choice of LED lights.
Yes! It really is just that easy!
- Twist the red leads on your lights with the red lead on this 12-inch battery snap.
- Protect the connection with tape or shrink tube.
- Then twist the black leads on your LEDs to the black lead on this snap. Again, protect the connection.
- Optional: to make your connections even stronger you can use solder on the connection joints
- Go! Snap on the 9 volt snap connector to any 9V DC battery.
- Press the locking switch and have a light show!
- Press again to turn it off.
- In our tests, 50 flashing LEDs shone nice and bright on a 9V battery for 4 1/2 hours.
- 3 LEDs were bright for 36 hours.
- If you are running less than 50 and more than 3, your run time per battery will be in the range between those low and high numbers.
The battery snap with a switch can handle solid and flashing LEDs. There is no carryover flash. Up to 50 LEDs flashing, solid or both can run on one 9-volt battery.
| Dimensions |
| Switch: 0.32 inches x 0.48 inches x 0.31 inches tall |
| Strap: Black Lead 12" Red Lead 13" |
| Switch is on red lead, 8.5 inches from the snap |
| Leaving 4" after the switch free |
If you need more control, consider the battery snap with TWO switches! This double switch is great to individually control two different items, like a siren plus lights, or lights on different parts of a model or lights on different floors of a roombox. Refer to the diagram.
- 12-inch red wire
- 3.75 inch to the split
- each split has 4 inches to the switches
- 4 inches free after the switches.
Related Items You May Need
Shrink Tube - Shrink Tube provides a nice solution for protecting the exposed wire connections.
Extra Kynar Wire - The same strong, flexible wire we use on this coin cell holder, and all of our bulb-style LEDs.
Regulated 12V Power Adapter - For a more permanent hard-wired solution without the need to buy batteries.
Customer Reviews
Based on 81 reviews
96%
(78)
2%
(2)
0%
(0)
0%
(0)
1%
(1)
M
Good priduct
K
I’ve been buying from Evans for almost 7 years. These folks provide top quality products and top rate service second to none.
J
Awesome service and products!
L
Ordering is easy, the site is well laid out. Always enjoy shopping here.
Best as always,
Loren
K
Their prices are great, their product line is great, and they even helped me out with special orders!!! Don’t go ANYWHERE ELSE to get your LEDs!!!
J
Thank you!!
5star
P
Thanks for the fun installation of the flashing warning lights on 2 maintenance trucks
on a train layout, really cool!
L
I needed a compact switch to complete my rite of passage as a model maker-- lighting my Enterprise 1701 with LED's- also supplied by Evans Design. I was delighted to locate the button and ordered 3. The one in the picture controls most all the saucer lighting. I am now a man.
A
I used this Light and push button switch for my Large scale RC airplane T28 . The brightness and flashing Light looks great.
J
These are perfect, pre-assembled and super cheap, what's not to love?
You may also like
Recently viewed