An easy way to bring power to your 3V LEDs.
Made to run our 3 Volt LEDs
This fully assembled unit features
- a coin cell holder suitable for the common cr2032 battery
- Wire leads
- a convenient push-on push-off button switch to turn your item on and off.
Add some cr2032 batteries to your order along with the coin cell holder and you will be ready to run as soon as this package arrives. You can find more cr2032 batteries at local stores.
In our tests, the premium cr2032 coin cell we ship with our coin cell holder is 200mA and can easily run 1-10 LEDs safely and brightly.
***Solid LEDs need to be separate from any flash or flicker LEDs. Give flash or flicker groups their own coin cell.***
In our tests, 6 lights lasted over 12 hours on one battery. By 12 hours they were noticeably dimmer. A test of the battery at 12 hours showed the voltage was down from 3.0 to 2.6 volts. The lights continued to stay on at a nice level for several additional hours before another battery was needed.
How we connect lights to this unit:The 3V coin cell battery slips right into the holder. And the LEDs are connected red wire to red wire. And black or green wire to black wire. Remember to protect connections with tape or use our shrink tube or your own, or use tape.
We have 2 wire lengths on the coin cell holder.
The 8" coin cell holder has 4" red wire on either side of the black switch and 8" black wire
The 4" coin cell holder has 2" wire on either side of the switch and 4" black wire. Either Coin cell holder comes with a black switch.
Holder/Switch Dimensions:The coin cell holder is .24 inches thick and .9 inches across at the widest point. You can clip the plastic "wings" to save 0.1 inch on the width if space is at a premium!