Coin Cell Holder Square
cr2032 battery holder battery life
3 Volt Coin Cell Holder
cr2032 battery holder
cr2032 battery holder with Switch 4"
cr2032 battery holder without switch 8"
cr2032 battery holder without switch 4"
cr2032 battery holder with Switch 4" wired female
cr2032 battery holder
how to connect a cr2032 battery holder

3-Volt Coin Cell Holder with Switch

 
Type
# batteries with each holder
Wire Length
Price
Regular price $3.75
Regular price Sale price $3.75
/
  • 487 items in stock, ready to ship
  • Backordered, shipping soon

Description

An easy way to bring power to your 3 Volt LEDs.

This fully assembled unit features
  • a coin cell holder made for the common CR2032 battery
  • wire leads
  • a convenient push-on push-off button switch to turn your LEDs on and off

Add some CR2032 batteries to your order along with the coin cell holder, and you will be ready to run as soon as this package arrives. You can find more CR2032 batteries at local stores.

In our tests, the premium CR 2032 coin cell we ship with our coin cell holder is 200mA and can easily run 1-10 LEDs safely and brightly.

***Solid LEDs need to be separate from any flash or flicker LEDs. Give flash or flicker groups their own coin cell.*** This is not an issue with any of our other power supplies. You can mix solids with flash/flicker using our 3 Volt AAA holder, 3 Volt AA holder, or 3 Volt wall adapter.

In our tests, 6 LEDs lasted over 12 hours on one battery. By 12 hours, they were noticeably dimmer. A test of the battery at 12 hours showed the voltage was down from 3.0 volts to 2.6 volts. The lights continued to stay on at a nice level for several additional hours before another battery was needed. This CR2032 battery holder will run your lights for a nice long time.

How we connect lights to this unit:

The 3V coin cell battery slips right into this holder. The LEDs are connected red wire to red wire, and black or green wire to the black wire on the battery holder. Remember to protect connections with tape, or use our shrink tube or your own to keep the connections separate.

 

We have two wire lengths on the coin cell holder:

  • The 8" coin cell holder has 4" red wire on either side of the black switch and 8" black wire
  • The 4" coin cell holder has 2" wire on either side of the switch and 4" black wire. Either Coin cell holder comes with a black switch.

Holder/Switch Dimensions:

The coin cell holder is .24 inches thick and .9 inches across at the widest point. You can clip the plastic "wings" to save 0.1 inches on the width if space is at a premium! Or, for really tight spaces, check out our extra small coin cell holder.

Related Items You May Need

Shrink Tube - Shrink tube provides a nice solution for protecting the exposed wire connections.

Extra Kynar Wire - This is the same strong, flexible wire we use on this coin cell holder and all of our bulb-style LEDs.


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 155 reviews
95%
(147)
3%
(4)
1%
(2)
0%
(0)
1%
(2)
M
Mark

Love his LED lights. Should had ordered more. It is fun and so easy to do.

M
Mark

Happy with it. Thank you! 😊

L
Loren Pippin

Excellent product. Easy install and functions well.

M
Mark

Very handy for your diorama project!

K
Kelly Seals

Everything purchased worked wonderfully. I wish I could give a 4.5 star review. My only issue was I was unable to cut the wires to size. I watched the tutorial but I just couldn’t get them to work. I’m sure it is just an issue on my end. Will definitely purchase again for my next project.

A
Alfonso Vargas
Good products

Used them in the past good service and products excellent for projects.

J
John

Everything was meticulously packaged and labeled. This team is amazing

J
Joel

Great products

T
Thomas Cortez
Perfect for Scale Models

Amazing product! Brightness for the small Z LEDs was a major detail improvement for all my scale model projects! Definitely a return customer

R
R.
3 Volt Battery Holder and switch

This kit was perfect solution to project. Model was located in Curio Cabinet thus wired adapters were not allowed :-) Was able to hide and have easy access to on/off switch.

Recently viewed