Revell A-Wing. Added lights to cockpit and engines using Evan Designs pre-wired LEDs.
B9 Robot
A full size replica of the lost in space robot.
Robby the Robot
1.8mm LEDs and a 3 volt coin cell really make the difference in this television star robot!
War of the Worlds
Thank you for making it so easy to add LED lights to my War of the Worlds Martian War Machine. I added (8) - 3mm 5-13 Volt DC Green LED Lights. (1) 3mm 5-13 Volt DC Red Normal Flash Rate LED. (1) 9 Volt battery strap w/switch. This model turned out awsome! Thanks to Anton Cacciamani for the Great pictures!
Enterprise over the planet
Star Trek Enterprise flying over the planet with LED lights and effects
R2-D2 in a space fighter
Star Wars X-Wing with R2-D2 in the back
War of the Worlds model
"I just have a small momentary, micro switch between the 9 volt battery and the orange blinking LED that I put in the base of the clear plastic beam. I put the movie on my surround system and "kinda" hit the switch to the saucer's firing. It wasn't spot on but if I tried harder (lol) I could match it up I'm sure. It is strange that the "blinking" orange led actually responds to the contact switch like that. I discovered it while just playing with the battery during testing. The red blinking LED I bought won't respond like that. So I admit I'm puzzled.
You know...I think the random blinking green lights are going to actually work better than the "Voodoo Kit" I bought for the larger saucer! There is an IC in the kit with normal LED's and I assume they will all blink at the same time. Don't know yet...as it is my next project.
After that...I'm going to build "The Witch". I'm going to use a bunch of 1.8mm blinking orange and one blinking red to mount into the base of the fire under the witches Pot to make it look more real. Maybe some green inside the glow in the dark witch...we'll see. I'll send a video of that... it'll be a few months off.
I'll be surely ordering more lites for more models as this is way too fun!"
Bob
Rusty robot
Rusty decommissioned robot (art) built by me and lit by you with light house LED circuit installed
USS Enterprise
Enterprise E project. I used 6 blue, 2 red, and 3 cool white LEDs. Thanks for your great products.
Lost in Space robot
I wanted to share with you the little gizmo your lights have gone into.
All the lights are from your site. Most were in when I purchased it.
I added the orange behind the mouth plate and they are powered via the speaker terminals on the mini-speaker (as you and I had discussed). Pretty good effect, huh!??!!
Ok, I
Metal Gear REX
Hi! I just wanted to share what I've done with your Nano Chip LEDs. This is Metal Gear Rex, a 1/100 kit plastic kit from Kotobukiya. I used 5 LEDs, 4 blue ones for the head, and a white one inside the cockpit. I love your products! Thanks!
Spindrift
Spindrift space shuttle from Land of the Giants TV show.
Into darkness Enterprise
Revell 1:500 Star Trek Enterprise "Into Darkness" using modeltrainsoftware LEDs and either 9V battery (for off stand play) or 9V adaptor (when on display).
Prime Axiom
Axiom Prime Colossal vector. Two months of work!! Would not have been possible with out you guys!!!! I will make sure all the folks at my local game store know about you and I will promote your site at the game convention in November at my company's booth!!
Battlestar Galactica
Modified Moebius Models Battlestar Galactica lighted with 18 3mm Evan Designs LED's
You might see I have some light coming through where it shouldn't, I'm repainting and detailing, and when I get it finished
I'm planning on making another YouTube video.
Gundam Model kit Master Grade Wing Gundam 1/100 Scale. Spray Painted (Montana Black) With Custom LED wiring
Gundam Beam Saber
Gundam Model kit Master Grade Wing Gundam 1/100 Scale. Spray Painted (Montana Black) With Custom LED wiring
Beam Saber Pose
Gundam armed
Gundam Model kit Master Grade Wing Gundam 1/100 Scale. Spray Painted (Montana Black) With Custom LED wiring
Full Kit
Robot fight
Here's another shot of my diorama "Undefeated" without the special effects. Your LEDs were perfect for this project!
Robot fight
Here's another shot of my diorama "Undefeated" without the special effects. Your LEDs were perfect for this project!
Fight on red ground
One last view...many more pictures and a full build article at:
www.modelerv.com/Undefeated.htm
Star Trek Enterprise
This is the 1/2500 Constitution Refit from the Cadet series Star Trek ships. I built it as the Enterprise A from STIV, V, & VI. The model is lighted with 9 SMD LED's and uses the 12v power from Evan Designs as a power source. Took approximately 6 months to build.
USS Odyssey
Sister ship of Enterprise-D, the USS Odyssey. In DS9's episode The Jem'Hadar, USS Odyssey goes into gamma quadrant to rescue Cmdr Sisko. This model depicts the battle. I used the arc-welder circuit to simulate a distressed warp nacelle. Model has been autographed by General Martok!
Robot universe
My Gunpla (Gundam models) project An EMS-10 Zudah (green/black) and MS-18E Kampfer (red/black) for the 2014 Gunpla builders world Cup. I used one blue and red Nano LED's and 9 volt battery bottom connector.
Battlestar Galactica ship
Adding pictures to my Lighted Moebius Models Battlestar Galactica.
YouTube video of my completed build form start to finish.
I started this kit Feb. 2nd 2011 and I just finished it Jan. 29th 2014.
Here are a few new pictures.
http://www.flickr.com/photos/oaroyfokker/12228438013/
http://www.flickr.com/photos/oaroyfokker/12228438023/
http://www.flickr.com/photos/oaroyfokker/12228438383/
http://www.flickr.com/photos/oaroyfokker/12228438753/
http://www.flickr.com/photos/oaroyfokker/12228807154/
http://www.flickr.com/photos/oaroyfokker/12228807174/
Giant Gundam robot
Gundam Model Kit Proto Zero(Wing Zero) Master Grade in Mech Base ready for action!!! LED wired and Montana Black Spray Paint
Stranger Things Pinball Mod
Some of our customers make a living modifying pinball machines to make them flashier and more fun for the players! Here, flashing light strings create the unique mode of communication used between mother and son in the Netflix original series Stranger Things.
Jawa Sandcrawler
Daniel shared this model of a Sandcrawler run by Jawas from Star Wars. This model uses cool white LEDs provided by Evan Designs.
Wing's Gundam
Another incredible job on one of many gundams that our customers complete!
BB8
What better use for LEDs than to bring to life one of the most iconic droids from the new Star Wars movies? In this model of BB8, Fabrizio uses a combination of 3v bulb and SMD LEDs in red, white, and blue.
USS Kelvin
This model completed by Dale Solomon uses fiber optic cable for the windows and a variety of 3v LEDs throughout the ship: square, bulb, and SMD.
Star Ships at Rest
Louis Holliday shares a photo of one of his finished models. As you can see, our LEDs are bright and clearly lit even in full indoor light.
USS Enterprise NCC-1701 D
Isiah Taylor submitted another awesome completed model to our gallery. This Star Trek model comes from the Next Generation series and uses several Evan Designs SMD LEDs in red, orange, yellow, green, and blue.
Star Destroyer
This Star Wars model built by James Davis makes for a stunning centerpiece. This model is lit from the inside using cool white LEDs from Evan Designs.
Star Destroyer
The back of this ship couldn't look more amazing! Warm white LEDs create the blasting effect from the ship's engines.
Han Solo's Blaster
James Davis created this incredible replica of Han Solo's DL-44 Blaster using Evan Designs LEDs in the barrel. This gun has fantastic detail!
Han Solo's Blaster
James Davis created this incredible replica of Han Solo's DL-44 Blaster using Evan Designs LEDs in the barrel. Look how bright the blast is!
Death Star Run
Alex shows how Evan Designs LEDs can improve an already great model! Cool white and red LEDs upgraded this model kit.
Star Trek Diorama
Long-time customer Tony created this diorama of the Star Trek episode "Galileo." He used green and blue SMDs for the aircraft's lights. Great job, Tony!
Shuttle Tyridium MPC
Jon Ross walks us through his build of a Shuttle Tyridium from Return of the Jedi. Using 9v LEDs from Evan Designs, he built this larger-than-usual model, and we're so glad he shared!
1/100 Tallgeese
Dale Solomon submitted his scale model of a Tallgeese with lit thrusters and head. Amazing how a few chip lights can bring a model to life! Thanks for submitting, Dale!
USS Discovery Ornament
C.I. shared this project with us: a lit ornament! Using our blue chip LEDs, this customer lit a model of the USS Discovery from Star Trek.
Joel Tavera used Evan Designs LEDs for his scale model. Great job, Joel!
Star Wars Slave I
Yee Soon Tuck assembled this amazing Star Wars model of a Slave I. Look at that paint job! This model uses Evan Designs' nano SMD, 3mm LED, and magnet wire to complete the lighting.
Land of the Giants Spaceship
Ken built a scale model of the spaceship from the classic scifi show, Land of the Giants. Learn more about his build from his video, where he shows how Evan Designs' breathing LEDs make the model even more impressive!
Tesseract Cube
James Fazar recreated the Tesseract from Marvel's Avengers series using Evan Designs' breathing and solid LEDs.
