I have made a few purchases in the past and I have always been satisfied with the products I've received. Recently, I purchased several flashing PICO LEDS (red, white and blue) that I installed in a 1/43 Amtrak Police Car light bar. The effect is better than expected. However, in order to install the "wiring harness" (all the little wires twisted together to represent a trunk wire) through the roof of the cruiser, I will have to remove the shrink tube and de-solder the wires leading to the chips from the flasher and resistor circuit in order to drill the smallest hole that will accept my "wiring harness". There is a total of 6 PICO LEDs in the light bar. My question is this. Would it be possible to purchase an order of flashing PICO LEDs with the chip wires NOT soldered to the flashing circuit and resistor? Whereas, all I would have to do is install the PICO LEDs where needed, thread the tiny wires through the appropriate size hole(s), solder the wires to the flasher circuit and apply the shrink tube. Sort of a "Kit" style configuration if you will. Of course, I will take FULL responsibility for any damage that may occur as a result of improper assembly of the aforementioned "Kit" configuration (sometimes experimentation produces collateral damage). This would reduce the amount of time necessary to disassemble and then re-assemble the PICO LED flashers in order to use them for my particular applications. Anything you can do to help will be greatly appreciated.
Respectfully,
Robert Cvarovsky
Chief of Police (Retired)
Border patrol car
lit Augustin's CBP ford by Motormax. Leds added to the head lights/tail lights, center front window, rear deck. Thanks for looking
Miami Vice Ferrari
Hi there guys
Just wanted to let you know that I just received my order (50169)
Thank you very very much, so happy to have found you guys :)
Supernatural series car
Hi there guys
Just wanted to let you know that I just received my order (50169)
Thank you very very much, so happy to have found you guys :)
Blade Trinity car
Hi there guys ðŸ˜Å
Just wanted to let you know that I just received my order (50169)
Thank you very very much, so happy to have found you guys :)
Black Chrysler
Hi there guys ðŸ˜Å
Just wanted to let you know that I just received my order (50169)
Thank you very very much, so happy to have found you guys :)
Septic truck
Unusual subject matter. Decals were custom-made using Hobby Cal from Model Train Software.
Ford truck details
Finished the painting from blue to white Ford F150 slick top. Leds added to front center windshield, rear window, head and tail lights. Drilled out bottom and put battery holder and tap switch as well as made a visor skirting for the front windshield-scratch built.
Chicago PD
Finished Augustin's CPD ford crown victoria. Leds added to the light bar, rear deck, head and tail lights. Still have to make a light bar number tag for the unit
Making of police car
1/24 Rosemont Illinois PD with Evann Design leds
Tractor supply truck
The most LEDs I've ever crammed into a 1/43rd scale diecast...45 in all!
Gasoline tanker truck
One of two tractor-trailers done for a Western New York home layout.
Truck with livestock trailer
One of my "I'll-Get-To-It-Someday" projects finally completed. Sold within minutes of circulating the video to my client Email list.
Funeral procession
A short funeral procession done for one of the modules of the Flower City Tin Plate Trackers. They set up massive displays at train shows and community events in Western New York
Bloomfield police
1/43 Chevy Impala Police Interceptor using "lights for 1/43 diecast" "flashing 1.8mm LED's" and "flashing chip LED's"
Ford Granada
Built this for a retiring irish police officer. He drove these Ford Granada's in the early eighties.
Led used were P I C O led's reds inserted in the rear . soft white for the headlights and blue flashing for the beacon.
Metalic police vehicle
1/43 Ford Crown Victoria Police Interceptor with "Lights for 1/43 diecast" " flashing pico LED'S" and "square LEDs"
DUI Enforcement
1/43 Ford Police Interceptor Sedan with "lights for 1/43 diecast" and "flashing pico LED's"
Black Tahoe police
1/24:POLICE-SHERIFF tahoe with Leds and chrome wheels
The blue bag
Here is the lighting in the Bug. The other 2 also have similar lighting.. All from you. Thanks, the pre wiring lengths, 9v connectors, switches, makes it easy. I just make 2 solder connections, shrink. Done.. Thanks again, Sean
Arrest in a Christmas scene
I just received your LED police car light kit and installed it and added to the layout. wow that really made the layout complete for this Christmas. i put it up on my utube page under David McVicker and i added your Evan Designs to it under the description. here is the short video i just took to display the lights on the 67 Camaro police car. you can use it if you like to advertise your led lights. they are amazing. thank you and im sure i will be ordering more. Happy Holidays
Dave
Christmas Coca-Cola truck
heres the christmas coke truck i did,, with your lights and stuff tried t do my own vinyl decals, need to improve on that if i do another.
Police car in the dark
X max Traxxas police body build
X-ray on Nissan
Before LEDs and After 3mm Cool Whites installed pictures of HDI Nissan with X-ray body
Long before Uber
Just could not resist this extremely rare diecast!
Oldtimer fire truck
Did this up for use on a friend's G-Scale garden railroad set up.
Classic cars
Hi,
After purchasing some of your products not so long ago I thought I'd share a recent completed project where the 'Classic Car Lights' where used with success.
My fetish this year (along with other car projects of course) was taking a 1:43 Corgi Toys Buick Riviera and converting it but more like a major code 3 for advanced modellers only :-)
The attached pictures below probably speak a thousand words but the challenge was basically cut the roof off this 70's American 2 door, make a custom interior and somehow shoe horn in working front and rear lights with a on/of switch.
I must say I'm pretty happy with the results and if your wondering, although I'm sure you've spotted it by now, the on/off switch is in the gear level and is simply a matter of pressing it down to activate lights on and off. Yes this was a tight fit and was probably my biggest challenge along with the 3v button battery location with some mods but I managed it.
Lots of chrome work and a rich red metallic paint job completes this project.
Thank you for some really great products along with a great service.
Seasons Greetings to you all from down under Australia!
Public transportation
Hello folks, thanks for making a great product. Your LEDs are the best. I am using them in many applications on my O gauge model railroad. The attached photo is my most recent use for lights on a bus. I added a fifth LED and fiber optics to light the clearance lights on the vehicle. I am very pleased with the results.
Pepsi truck
This is my custom New Ray Pepsi beverage truck. I has 8 LED's and custom paint and decals. Here is the front and left side.
Monster truck parts
Grave Digger Body for R/C monster truck
Chevy Tahoe
Chevy Tahoe under cover with lights
Snack break
Dave, here are a couple photos of the drive-in diner in it's completed stage. Thank you for all of your help and info.
Mike
Buick oldtimers
Evan Designs LEDs
Red Buick Riviera
Evan Designs LEDs
Red dump truck
One of six trucks purchased as a lot. Already sold.
Truck with mobilgas tanker
An exceedingly rare diecast, purchased from a friend. Sold within 15 minutes of putting it on the vendor table at a train show!
Drivers on lawn tractors
Saw these in a diecast company catalog and said, "Why Not?" All three quickly sold
Plymouth Fury police
A rare diecast done up for a client in Western New York
Blue police vehicle
Just finished lighting up a Michigan State Police utility. Led added to bubble light, head and tail lights.
Macon County Sheriff's vehicle
1 24 SHERIFF: Macon County Sheriff utility using Evan Designs LED lights.
Cement truck
Cement truck with Evan Designs LED lights.
Buick Riviera
Hi,
After purchasing some of your products not so long ago I thought I'd share a recent completed project where the 'Classic Car Lights' where used with success.
My fetish this year (along with other car projects of course) was taking a 1:43 Corgi Toys Buick Riviera and converting it but more like a major code 3 for advanced modellers only :-)
The attached pictures below probably speak a thousand words but the challenge was basically cut the roof off this 70's American 2 door, make a custom interior and somehow shoe horn in working front and rear lights with a on/of switch.
I must say I'm pretty happy with the results and if your wondering, although I'm sure you've spotted it by now, the on/off switch is in the gear level and is simply a matter of pressing it down to activate lights on and off. Yes this was a tight fit and was probably my biggest challenge along with the 3v button battery location with some mods but I managed it.
Lots of chrome work and a rich red metallic paint job completes this project.
Thank you for some really great products along with a great service.
Seasons Greetings to you all from down under Australia!
Cheers
Regards
John Kounelis
Police on its way
X max Traxxas police body build using Evan Design LED lights.
Empty truck
Here's an example of how i have been using the LED lights I purchased pfrom Evan Designs.
Chicago police
1/24 POLICE: Chicago Tahoe with reflective and leds purchased from Evan Designs.
Police ouside of a building
Police Car using Evan Design LEd lights
Florida police vehicle
1/24 POLICE: Florida Highway Patrol with reflective decals using Evan Design Lights
Land Rover Defender
Did this up as a display model for one of my wife's co-workers. Fourteen LEDs used. Could have done even more, such as interior lighting but stopped at this level to keep the price within the client's budget.
