Panel Mount Power Jack
dc power jack
dc power jack with one switch
dc power jack with two switches
dc power jack with 3 switches
dc power jack with 4 switches
dc power jack with 5 switches

Power Jack with Added switches

Power Jack Style
Switch
Regular price $2.00
/
  • 293 items in stock, ready to ship
  • Inventory on the way

This is the same Power Jack meant for use with our 12V 1Amp or 2Amp power adapters OR our 3V 1 Amp or 2 Amp Adapter it fits all of the adapters we sell.  We can't say if it will fit the adapter you have if it is not ours.

This is an easy unit to use: the switches are already attached to the power jack. Or get the unit with wires only, no switches.  We have them that way as well.

We have power jacks with a variety of switches added.  In the above example, there are 5 of the on/off switches attached to the power jack.

The advantage of having a switch added, you do not have to plug/unplug the power, and you can individually control the LEDs in your project.

Multiple switches give more control over the different areas in a project. Consider 1 switch for the first floor one for the second floor. Or 1 switch for the first diorama section, one for the next section, etc.

How to attach your LEDs to this ?

1. All black wires from all of the LEDs will go to the single black wire coming from the power supply.

2. The only difference in the next step is the red wires. You are going to group the red wires according to the zones of your project.

Example:

  • The red wires from the first floor go together and attach to the wires on the First Switch.
  • The red wires from the second floor lights group together and attach to the wire from the Second Switch.
  • The red from the outside lights get grouped together.  They attach to the wire coming from the Third Switch
  • That's it.  Now you can press switch 1, or 2 or 3 independently.  Have lights come on or off depending which switch you have pressed.

Each switch controls a certain number of LEDs, depending on the red wires connected to it!

The switches are 1 Amp. So each switch can control up to 50 LEDs. LEDs are 20 milliamp.

Size specifications: thread diameter: 0.45 inch (a 1/2 inch hole works)
                               Maximum Panel mount thickness 0.25 inches

Remember to shrink tube all connections to prevent shorts!



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
V
Vin
Perfect

Easily added ac power to my project with this adapter. Works awesome.

G
Guy Curotte
EXTREMELY SATISFIED!

I am very satisfied with my first order and the good service I received. Evan Design aim to please the customer.
Even got answers to my queries. Many thanks. Will surely spread the good words.

Guy Curotte

B
Billkwando
Great jack!

I liked it so much I ordered a spare. Fit's great in the base of my Enterprise D and it's so much easier to drill a round hole than to try and cut a spot for the non-screw jack. I'd say I would order again, but I already did!

M
Michael
Perfect

Very easy to install. Low profile didn’t detract from my display.

R
Roger Cook
This part was among fir first order from Evan Designs.

It performed to my expectations. I use a DPDT toggle switch to switch between 12v AC/DC and 9 volt power sources for my project.

G
Gregg H Wickham
Exactly as described

Works perfectly; just what I was looking for.

L
Larry Boyd
Great Eguipment

Very good equipment. Would purchase again.

A
Adam Bernier
five way switch

fantastic products!!! tried to load pics of all the lights but they were over the 2mg max

Recently viewed