micro LEDs
micro LEDs colors
Chip Nano Pico and Z LEDs sizes
Chip Nano Pico and Z LEDs in full light
Different colors micro LEDs on one coin cell battery
micro LEDs chip
micro LEDs nano
micro LEDs pico
the smallest micro LEDs z

Chip, Nano and Pico LED Lights

Size
Color
Voltage
Wire Length
Regular price $2.25
/
  • 926 items in stock, ready to ship
  • Inventory on the way

Description

These super small LEDs are known as surface mount LEDs, SMD LEDs, or Chip LEDs.

They are very small and compact yet still very, very bright! The benefit of a flat and compact LED Chip,
already wired for you, is that it still gives a great amount of light, but can be mounted flush, with no bulb shape showing.

We have taken these SMD Chip LEDs and taking care with tolerances, added 8 inches of red and green superfine magnet wire.

Get these chips already wired, tested, guaranteed, and fully ready to connect to your power supply. No resistors need to be added, we have done that part!

Need a really, really small LED? Try our new Z-LED
At 0.65mm wide by 0.36mm height by 0.4mm height these LEDs are our smallest.  When it is not lit it is hard to see, so if your project needs a LED that will not be visible until turned-on this is a great choice.

Frequently Asked Questions

"What do I need to run these?"


"How many can I run at once?"

  • Using a 3 volt coin cell holder you can run 1-10 chips.
  • Using a 3 volt AAA holder you can run 1-30 chips
  • Using a 9 volt battery snap/switch you can run 1-50 of the chips.
  • Using a 12 volt 1 Amp supply is also 50 chips, no need to turn off.
  • Using your own power? The chips draw 20 milliamps each. So check your power supply to see how many milliamps it lists. A 1000 milliamp supply can run 50 chips.

"Can the chip LEDs be run along with other LEDs from the same battery or coin cell?"

Yes the chips can be run right alongside all of the other sizes of LEDs on the same power supply.

"On the AC chips, what size is the rectifier/resistor unit?"

evan designs universal rectifier
This diagram shows the size of the rectifier unit

"I need the AC type chips but I have to run them through a tight passage?"

We have a solution! See our separated LEDs here: Separated



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 299 reviews
96%
(287)
3%
(8)
1%
(2)
0%
(1)
0%
(1)
T
Todd
Let ED do the work

I had Evan Designs assemble some components for me and their work has held up beautifully.

P
Paul
Most excellent!

These are awesome! Worked great for my model car. I was able to get the turn signals to light up. Something I didn't think I was gonna be able to do. The z size made it possible. Thank you!

B
Bruce Walters
Good value

Great product and customer service engineering support (they ensure you have success). Yep, it works. 3v perfection.

B
Bruce Walters
Good value

Great product, and customer service engineering support (they ensure you have success). Yep, it works.

A
Al Ormsbee
Led

Using chip LEDs in a wood ship model.they are perfect and plan to use them in my next model.Evan Designs is a great company reasonable prices and fill and ship orders quickly.

D
Dan Priddy
Great Support

Support called and let me know there was an error in my ordering, helped me make the right choice. Supper Nice !

M
Merle Bush
Chip Review

Great product for the price. Easy to use and build into models.

L
Loren Miller
Great choices and convenience

Based on past purchase I know these chip SMD LED's will be perfect.

I'm uncertain if my 10.5 discount was applied. Let me know if otherwise.

Best as always,
Loren

M
Mike Hamm
Just what I wanted.

I'm making a tree topper ornament on my 3D printer and the upper part is translucent. I intended to put lights in the upper part and figured these would work for that. I've tried them out and they work great for that. Note that this is a combination of the 8" ones and one 14" one.

N
Nate W.
Great LEDs for mecha models and model cars alike

I purchased 2 warm white Z LEDs for a Master Grade Gundam model kit I'm assembling, and so far they more than surpass my expectations in terms of light output and brightness. Would order again, and more than likely will.

Recently viewed