Black Switch
9 volt battery snap connector
9 volt battery snap connector 4 inch
9 volt battery snap connector with a connector
9 Volt Battery Snap & Micro Push Button Switch For LEDs
dimensions of 9 volt battery snap connector
9 volt battery snap connector in use

Battery Snap pre-connected to a Micro Push-button Switch

Switch
Wire Length
Regular price $2.75
/
  • 2006 items in stock, ready to ship
  • Inventory on the way

Description:

An easy way to bring power to your 5-12 Volt LEDs and accessories.

The 1 Amp switch is a push-on, push-off switch. We have pre-connected the switch and battery strap, nothing left to do but connect your choice of LED lights.

Yes! It really is just that easy!
  • Twist the red leads on your lights with the red lead on this 12-inch battery snap.
  • Protect the connection with tape or shrink tube.
  • Then twist the black leads on your LEDs to the black lead on this snap. Again, protect the connection.
  • Optional: to make your connections even stronger you can use solder on the connection joints
  • Go! Snap on the 9 volt snap connector to any 9V DC battery.
  • Press the locking switch and have a light show!
  • Press again to turn it off.
And you can connect A LOT of LEDs to this sturdy system.
  • In our tests, 50 flashing LEDs shone nice and bright on a 9V battery for 4 1/2 hours.
  • 3 LEDs were bright for 36 hours.
  • If you are running less than 50 and more than 3, your run time per battery will be in the range between those low and high numbers.

The battery snap with a switch can handle solid and flashing LEDs. There is no carryover flash. Up to 50 LEDs flashing, solid or both can run on one 9-volt battery.

If you need more control, consider the battery snap with TWO switches! This double switch is great to individually control two different items, like a siren plus lights, or lights on different parts of a model or lights on different floors of a roombox. Refer to the diagram.
  • 12-inch red wire
  • 3.75 inch to the split
  • each split has 4 inches to the switches
  • 4 inches free after the switches.

Related Items You May Need

Shrink Tube - Shrink Tube provides a nice solution for protecting the exposed wire connections.

Extra Kynar Wire - The same strong, flexible wire we use on this coin cell holder, and all of our bulb-style LEDs.

Regulated 12V Power Adapter - For a more permanent hard-wired solution without the need to buy batteries.


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 74 reviews
96%
(71)
3%
(2)
0%
(0)
0%
(0)
1%
(1)
L
Loren Miller
Perfect fit and function

I needed a compact switch to complete my rite of passage as a model maker-- lighting my Enterprise 1701 with LED's- also supplied by Evans Design. I was delighted to locate the button and ordered 3. The one in the picture controls most all the saucer lighting. I am now a man.

A
Alexander Martinez
RC airplane Flashing Light

I used this Light and push button switch for my Large scale RC airplane T28 . The brightness and flashing Light looks great.

J
Jeremy
Good connector, great switch, all assembled for you already

These are perfect, pre-assembled and super cheap, what's not to love?

J
Jerome Marchuk
LED micro switch with button

I received my entire order quite quickly and in perfect condition. The quality of the products is quite high, and I am very pleased with my purchase. The LED flashing lights and micro switch work perfectly well.

S
Steve
Nice product

Well made

D
Dan Wiley
Wire came apart

The wire fell off the switch five minutes before I needed it at a holiday job.

hi Dan
I am so sorry to hear about this disaster!
If you had reached out to us when the wire broke we might have been able to help you to use it anyway.
I know it's too late now but we could send a replacement for free if you want. Please respond as soon as possible so we can replace this for you!

We do not have any reports of this happening so I can't say why your wire came off like that, maybe it was manipulated too much being put into your Holiday project.

Shelly

J
JPW
Super 9 volt battery snap with switch.

This 9 volt battery snap with switch has made my latest project easy.

D
Don H
Works Perfect

Made well

D
Dave
Great service

Would buy again. Thanks guys!

D
Dave Natale
Switch suggestion

The switches were extremely easy to wire and they worked well. My only suggestion is to offer a version that allows the switches to be mounted to a panel--have threads on them with a nut so just the button can be seen on the front of the panel and the wiring is all behind it.

Hi Dave
Thank you so much for leaving your review!
We do have that style switch here!
https://evandesigns.com/products/panel-mount-push-button-switch
If you like it better, you can get our battery snap with no switch
https://evandesigns.com/products/battery-snap
And use that threaded one instead.
I hope that helps, let me know if you need more help or have any other questions for us!
Shelly
Evan Designs

Recently viewed